Air Compressor Large Volume

Aridyne 2000 Air Compressor, 120/60 Voltage 12 amp, 17''x35''x21'', 157 lbs. Three air 3/4''-16 DISS male check valve outlets installed. Two Oxygen DISS check valves included. Continuous flow of 64 lpm at 50 psig with 3 degrees F dew point depression. Will automatically compensate for lower flow demands by a 10 degree F dew point with a continuous flow of 56 lpm. Audible and visual high temperature and low pressure alarms, with DC powered six-volt backup. Vibration-free gauge showing diminished pressure, impaired drying, or exceeded flow capacity. Circuit breaker, elapsed time indicator, and thermal overload protector included.

Air Compressor Large Volume

Aridyne 3500 Air Compressor, 120/60 Voltage, 8.5 amp, 11'' x 33 1/2'' x 15 1/8'', 90 lbs. Two air 3/4''-16 DISS male check valve outlets installed. Two Oxygen DISS check valves included. Continuous flow of 42 lpm at 50 psig with dew point depression of 5 degrees F. Vibration free gauge showing diminished pressure, impaired drying or exceeded flow capacity. Circuit breaker, elapsed time indicator and thermal overload protector included.

Air Compressor/portable

Timeter PCS 414 features a durable, mar-resistant steel case that's easy to clean and maintain. Unit weighs 26.5 lbs. The PCS414 has been engineered for maximum efficiency and long lasting service life with an output rating of 14-lpm at 50 PSI. Permanently lubricated heavy-duty bearings are designed to operate 24 hours per day, 365 days per year. Cool-running and lightweight the PCS 414 is ideal for use with high-pressure and low-pressure aerosol administration devices such as pediatric tents, croupettes, mist tents and large and small nebulizers including those being prescribed for the aerosolization of Pentamidine.

Anesthesia Carbon Dioxide Gas Absorbent

NEW QUALITY ENHANCED COMPOSITION
CARBO2LIME carbon dioxide absorbent is a granular soda lime absorbent for the efficient removal of carbon dioxide from closed and semi-closed patient breathing circuits. CARBO2LIME is a quality compound which contains no postassium hydroxide (KOH). It is formed by proportionately mixing calcium hydroxide (Ca(OH)2) with a small amount of sodium hydroxide (NaOH).
Available in three convenient package sizes, CARBO2LIME is supplied as hard, irregularly shaped granules which have been processed to reduce dust formation from friction. Significant process improvements have resulted in enhancements in moisture content (12-19%), hardness, and porosity generation. As a result, CARBO2LIME delivers dependable, efficient CO2 absorption.
Allieds CARBO2LIME meets or exceeds the United States Pharmacopoeia - National Formulary specifications for soda lime and is manufactured in accordance with the United States Food and Drug Administration (FDA), Good Manufacturing Practices (GMP), and ISO 9002 guidelines.

FEATURES
No KOH - Minimum anesthetic agent degradation (e.g., Sevoflurane to Compound A and other toxic products) compared to other brands containing potassium hydroxide.

Low Dust - Minimum dust levels with the benefits of high surface area and graded particle size.

Low risk of carbon monoxide formation due to good resistance of dry gas desiccation.

Low Bulk Density - Less weight required to fill absorber and, therefore, less waste when refilling frequently (e.g., daily) prior to full exhaustion.

Low odor due to reliable control of indicator dye concentration. Dye overdosing causes amines to be released; dye underclosing causes poor/no color change.

Available in pre-packaged cartridges, bags for canister refill, and 5-gallon pails.

Packaged for Flexibility

Non-hygroscopic CARBO2LIME is available in three convenient packages to meet the needs and applications of todays medical professional.

Pre-Packaged Cartridge: Sealed in an airtight safety wrapper, the disposable, pre-packaged cartridge eliminates measuring, filling and spilling. The high clarity styrene polymer body inserts smoothly into Dr*eger and Ohmeda anesthesia machines.

Bag: Heat-sealed bag is designed for convenience. The airtight plastic- and foil-lined bag contains a sufficient amount of CARBO2LIME to fill a standard 1350 gram absorber canister.

Pail: An economical option, the rugged five-gallon plastic pail is designed for pouring applications

Color Indicator and Regeneration

Medical grade CARBO2LIME contains a small amount of ethyl violet, which acts as a color indicator when the absorbent is nearing exhaustion. CARBO2LIME color is white to off-white. As CO2 is absorbed, it reacts with the ethyl violet, which causes the granules to distinctively change to purple. The purple color will intensify to indicate exhaustion of the soda lime. When the deep purple color has penetrated to half the depth of the absorber, the used material should be discarded.

If exhausted self-indicating CARBO2LIME is left to stand, its color will slowly change back to white, due mainly to a small quantity of unreacted hydroxide in the interior of the granules which slowly react with the sodium carbonate on the surface. CARBO2LIME, in this apparently regenerated condition, should never be used again as it will become exhausted and its color will change again almost immediately. Therefore it is essential to empty canisters immediately after use.

Bacteria Filter/s777

Bacteria Filter, threaded, opposite ends

Calibration Analyzer/respical

Respical gives biomed professionals a uniquely valuable tool to increase productivity and effectiveness. Respical Calibration Analyzer (Includes software, operator's manual, power cord, RS-232 cable, accessory kit and filter adapter).

Liberty Oxygen Conserver & Mini Liberty

LIBERTY™ & Mini LIBERTY™ Oxygen Conservers

When selecting an oxygen conserver, it's important to have a choice that fits your lifestyle and budget. Now Allied, a name synonymous with innovative excellence, offers two great choices! Introducing LIBERTY™ and Mini LIBERTY™, two totally automatic and value-packed conservers.

Living up to their fully automatic features, both the LIBERTY™ and Mini LIBERTY™ engage exactly and only when you start to breathe, and turn off when the cannula is removed from your face. The result is a conservation ratio of 5:1, which means your cylinder's oxygen supply will last up to five times longer. For extra peace of mind, a flashing green light on the display panel confirms with each pulse that oxygen is being delivered and the unit is functioning properly.
Engineered to provide extended battery life and powered by a single C battery, the LIBERTY™ can be used 8 hours a day for 2 to 3 months before battery replacement, giving you the freedom to go three times longer before replacing the battery. With its single AA battery, the Mini LIBERTY™ can be used 8 hours a day for 3 to 4 weeks before battery replacement.

A red warning light will flash continually for 24-48 hours when it's time to replace the battery in either model. This safety feature makes traveling much more secure, even when taking extended trips abroad.

For versatility, a convenient toggle switch allows you to select the continuous flow mode. Located at the bottom of the unit, the switch is designed to avoid accidental mode changing.
LIBERTY™ & Mini LIBERTY™
Lightweight and truly portable
Totally automatic and reliable oxygen delivery and conservation
User-friendly, hassle-free operation
Built-in oxygen regulator with all-brass construction
Best value on today's market

SPECIFICATIONS LIBERTY™ & Mini LIBERTY™
Conservation Ratio: 5:1

Weight with Battery:
LIBERTY™ 17.3 oz.
Mini LIBERTY™ 14.7 oz.

Dimensions (H x L x W):
LIBERTY™ l.9'' x 5.5'' x 3.3''
Mini LIBERTY™ 1.9' x 4.4 '' x 3.3''

Power Supply:
LIBERTY™ C cell alkaline battery
Mini LIBERTY™ AA cell alkaline battery

Operating Temperature: 0C to 50C
Relative Humidity: 15% to 95%
Operating Voltage: 1.l to 1.8 volts
Operating Pressure: 22 psi +1-10%
Inlet Pressure: 500 to 2.200 psi
Power Consumption: 3 mA at idle time and a maximum of 450 mA during the delivery of oxygen pulse
Activation Pressure: Less than 1cm H20
Adjustable Continuous Flow: Factory pre-set to 2-3 lpm, adjustable to 2-6 1pm

Lif-o-gen

Refillable or Disposable - Lif-O-Gen emergency oxygen kits from Allied Healthcare provide a simple, safe and effective means of delvering lifesaving oxygen in the critical moments between a medical incident and the arrivial of medical professionals. LIF-O-GEN emergency oxygen kits are designed to be installed in the office spaces, factories, malls, at swimming pools or in the home.... any place sudden respiratory distress may occur. Thes kits can be deployed in seconds by a co-worker, family member, or even by the victim of the emergency. To fill a refillable cylinder call 1-800-411-5136

Litter, Half Back Extrication/rescue Vest

LSP Half Back

The LSP Half Back is a versatile short body immobilization board designed for suspected cervical/spinal injuries during confined space extrication (such as automobile, storage tank, ship, etc.). It comes complete with a V-shaped padded head rest, a full head harness, and an optional helmet harness for helmeted victims. Both harnesses can be used with the Miller Full Body Splint/Litter for safe and effective head immobilization. The closed-cell foam interior molds to the shape of the body, providing comfort and the most effective body immobilization.

When used in conjunction with the optional LSP Vertical Lift Strap Assembly, the Half Back can be used for:

Vertical lifting of a spinal injury victim from a confined space or on a full body backboard
Vertical lifting of both rescuer and victim

Litter, Miller Fully Body Splint

Miller Full Body Splint/Litter
The Miller Full Body Splint/Litter is a versatile spine immobilization board and litter that comes complete with a full head and body harness. This unique harness system will allow a victim to be rotated onto his side for proper airway management or extrication without jeopardizing spinal position. An optional helmet harness allows this same critical immobilization of a helmeted victim.

When used in conjunction with the LSP Half Back, the Miller Board can be used for safe vertical lifting in normal and confined space rescue without compromising patient safety or spine immobilization.

The many unique features of the Miller Board have made this the most popular rescue and immobilization product for over 20 years.
• Rigid foam core provides both strength and buoyancy for water rescue immobilization. The board will float 250 pounds in fresh water and 300 pounds in salt water.
• Strapping system allows the rescuer to immobilize and restrain combative patients.
• Split-leg design allows for easy independent leg traction, accessibility, and compatibility with the Stokes basket litter.
• Shoulder strap design prevents both lateral and horizontal movement of the patient during extrication and transportation.

Lsp Oxygen Pressure Regulators

Life Support Products Oxygen Regulators Built to Last in the Rugged Emergency Environment! The Life Support Products series of all-brass body oxygen pressure regulators provides enhanced safety features and a greater number of flow selections for the EMS professional. The uni-body construction is designed to strengthen the regulator, minimize potential leak paths, and prevent breakage of the yoke cylinder connection assembly. For additional safety, inlet filters provide gas filtration down to 20 microns. Standard LSP regulators have a 5-year warranty. LSP regulators offer 12 flow positions ... more flow selections than ever before. Equipped with up to two DISS check valves, LSP regulators provide regulated pressure and flow for the operation of two demand valves, or one demand valve and one aspirator, or any pneumatically-powered ventilator. A DISS or hose barb adjustable flow outlet permits attachment of a disposable mask, cannula, or bag mask device. All three outlet configurations may be operated simultaneously. LSP Rhino122 oxygen pressure regulators come with a shock-resistant virtually unbreakable low-profile gauge. The gauge is protected by an aluminum shroud, which is integral to the regulator body and is designed to prevent damage or contamination. A replaceable shroud lens cover also prevents dirt and liquids from contaminating the gauge. Rhino122 regulators are available with up to two male oxygen DISS check valves, and adjustable flow capability through a hose barb outlet. The Rhino122 series of regulators come with a limited 10-year warranty. FEATURES Uni-body construction is designed to prevent yoke breakage and regulator leakage, and provides complete protection to the constant flow selector knob. Nickel-plated brass body is fire resistant, and able to withstand corrosive materials, the marine environment, and harsh weather conditions. Sintered bronze high-pressure inlet filter for enhanced protection against contamination. Compact, break-resistant low profile contents gauge. Large, easy-to-read flow rate numbers. Two body designs: yoke inlet for small cylinders, and nut and nipple inlet for large cylinders. Hose barb or DISS outlet connection for oxygen supply to patient. 10-year warranty on Rhino122 series, with patented protective shroud to prevent gauge breakage. SPECIFICATIONS Supply Pressure: 500 to 2200 psi Outlet Pressure: High flow outlets: 40 to 60 psi at 500 to 2200 psi inlet pressure Flow Capacity: High flow outlets: 125 lpm minimum single or combined flow with 500 psi inlet pressure Constant flow outlet selections: 0-15 lpm: 0, .5, 1, 1.5, 2, 3, 4, 5, 6, 8, 10, 15 0-25 lpm: 0, .5, 1, 2, 4, 6, 8, 10, 12, 15, 20, 25 Filter: 20 micron sintered bronze Safety Relief Pressure: 75-125 psi Operating Temperature: -30* F to 125* F Storage Temperature: -20* F to 120* F Materials: Body: Nickel-plated brass Knob: Anodized aluminum Outlets: Nickel-plated brass Internal parts: Brass, stainless steel, Viton, silicon and Teflon NOTE: All LSP brass oxygen regulators are laser-engraved with the LSP logo, model number, date code and bar codeto assist in preventing loss and tracking for routine maintenance.

Lsp/ Cpr- Demand Valve

The LSP-CPR/ Demand Valve is designed to provide 100% oxygen to a breathing or non breathing patient in an emergency situation. The valve is designed for use waith a mask, endotracheal tube or tracheotomy tube. The CPR/Demand valve complies with AHA guidelines recommending that 100% oxygen be given to victims of a heart attack and/or smoke inhalation. The valve can be used in conjunction with a portable oxygen cylinder with a pressure regulator or with a central oxygen source.

Mobile Aspirators - Gomco 3020,3021,4032,4033

MOBILE ASPIRATORS - Gomco stand-mounted units offer dependable, easy to regulate suction for hospital use. Stands include 3'' non-marking casters, handy cord storage, chemical resistant stainless steel top, compact stand design, graduated 600 ml glass collection bottle or 1100 ml disposable canister, hydrophobic bacteria filter to help prevent fluid and aerosol contamination, hospital grade plug, and are UL listed and CSA certified.
Suction systems are equipped with an easy-to-read gauge, calibrated in both inches Hg and mm Hg, and a suction regulating valve. These models also include illuminated on/off switches.
MODEL 3020 - This diaphragm unit is designed for general suction use. Its powerful 1/8 horsepower motor creates up to 22'' Hg vacuum. Lightweight and maneuverable, this model is perfect for numerous bedside uses.

MODEL 4032 - Designed for heavier suction, such as in recovery rooms or dental clinics, this model features a 1/10 horsepower motor that creates up to 25'' Hg vacuum.

Mobile Aspirators - Gomco 3040,3041,4042,4043

MOBILE ASPIRATORS - Gomco stand-mounted units offer dependable, easy to regulate suction for hospital use. Stands include 3'' non-marking casters, handy cord storage, chemical resistant stainless steel top, compact stand design, new float shut-off assembly, graduated one-gallon polycarbonate plastic collection bottle or 2100 ml disposable canister, bacteria filter to help prevent fluid and aerosol contamination, and a hospital grade plug.

Suction systems are equipped with an easy-to-read gauge, calibrated in both inches Hg and mm Hg, and a suction regulating valve. These models also include illuminated on/off switches.
MODELS 3040/4042 - These units feature an insulated hidden motor and a durable stainless steel top.

Model 3040 features a 1/8 horsepower diaphragm motor, and is UL listed and CSA certified.
Model 4042 utilizes a 1/10 horsepower rotary compressor motor, and is UL listed.

Nebulizer/s5000

The Schuco S5000 Nebulizer by Allied has been designed to offer a compact style and provides worry-free affordable nebulizer therapy. Completely self-enclosed for ease of cleaning. 5 year Warranty. Easily portable, quiet, UL Listed. Electrical is 115/60, maximum 35 PSI, liter flow is 9 LPM at nebulizer cup, weight is 3.8 lbs, with a 5 year warranty.

Optivac Ac/dc Portable Suction Unit

The Quality Of Gomco Where You Need It Most. The G 180 is the second generation OptiVac in the industry-leading Gomco line of portable suction equipment. Its compact design, ease of operation, rechargeable battery, AC power supply, and fully-enclosed unit are just a few of its advanced features. FEATURES 022 Run time operation on fully-charged battery for approximately 3 hours at maximum vacuum. 022 25-550 mm Hg vacuum range, coupled with greater than 30 lpm flow, provides powerful suction for faster aspiration. 022 Fully chargeable in 8 hours. 022 Will run on AC power even with a low battery. 022 Will run for approximately 1 hour after being charged for just 2 hours. 022 Long-life rechargeable battery eliminates the need for frequent replacement. 022 Sealed water-resistant unit is easy to clean, and minimizes potential contamination or damage to the compressor and battery. 022 Control panel at an angle for easy viewing. 022 Quality-engineered thermoplastic provides impact resistance and durability. 022 3-year warranty on the unit, and 1 year on the battery. SPECIFICATIONS Weight: 11.4 lbs. with internal power Dimensions:9.4'' H x 7.5'' W x 16.8'' L Vacuum Range:25-550 mm Hg Vacuum Flow:>30 lpm Battery:Rechargeable lead acid Battery Life (at maximum vacuum)3 hours at 550 mm Hg :3 hours at 550 mm Hg Battery Charge Time: Full charge in 8 hours Battery Depleted (unit automatically shuts off) : Yes Bad Battery Sensor: 5 red LEDs Battery Charge Status: Indicator lights Remote/Internal AC Charger: Internal Charging Circuit Capable of Running on Low Battery: Yes Collection Canister: 1500 ml AC Operation: 110-230 volts, 50/60 Hz DC Operation: 12 volt DC battery Classified per UL 60601-1, U.L.C., and CE 0543.

Oxygen Cylinder Cart

PORTABLE OXYGEN TANK CART, FOR SINGLE TANK, TYPED/E CYLINDER. STEEL CONSTRUCTION.

Oxygen Emergency Units, Portable, Replacement Oxyg

15 Minutes of Oxygen, Replacement Cylinder. A replacement cylinder of oxygen for the 15 and 30 minute oxygen units, 31-01-0500 and 31-01-0555.

Oxygen Emergency Units, Portable, Units With 30 Mi

30 Minutes of Oxygen, Twin Pac. Includes- (2) disposable cylinders, oxygen mask with 7 feet of oxygen tubing, and a 6 LPM push-button oxygen regulator with contents (pressure gauge)

Oxygen Emergency Units, Portable, With 15 Minutes

15 Minutes of Oxygen, lightweight (3 lbs.) Includes- disposable cylinder, oxygen mask with 7 feet of oxygen tubing, and a 6 LPM regulator with contents (pressure gauge).

Oxygen Regulator Cga 870 0-15 Lpm

Oxygen Regulator CGA 870 0-15 lpm

Oxygen Regulator Cga 870 0-25 Lpm

Oxygen Regulator CGA 870 0-25 lpm

Resuscitator

Portable Resuscitator Kit: Includes Olive Drab Case, L575-010 Manual trigger ventilator, 02 hose 6', L370-220-A Regulator, L002865-050 Handwheel, L595161 Adult Disposable Mask

Suction Canister/s1160 Plastic Canister 1200 Cc

1200 cc Plastic Replacement Canister

Suction Canister/s1160a Plastic Canister 2000 Cc

2000 cc Plastic Replacement Canister

Suction Canister/s1160b Plastic Canister 800 Cc

800 cc Plastic Replacement Canister

Suction Canisters/disposable Collection Unit, Diss

Disposable Collection Unit, DISS, 2400 ml 36/cs

Suction Canisters/disposable Collection Unit, Diss

Disposable Collection Unit, DISS / STEM, 2400 ml 48/cs

Suction Canisters/disposable Collection Unit, Stem

Disposable Collection Unit, STEM, 2400 ml 36/cs

Suction Canisters/glass/s1161 Glass Bottle 32 Oz.

32 oz. Glass Replacement Bottle

Suction Pump, Aspirator, Portable/s130 Schuco

The Schuco Model 130A high volume aspirator and suction system is simple, portable and reliable. Designed to suit the needs of the uncompromising professional in the hospital, institution or physician's office, this durable unit has an ultra-strong lightweight casing and controlled vacuum regulation from 0-22'' Hg. Voltage is 115/60.

Suction Pump, Aspirator, Portable/s132 Schuco

The Schuco Model 132 high volume aspirator and suction system is simple, portable and reliable. Designed to suit the needs of the uncompromising professional in the hospital, institution or physician's office, this durable unit has an ultra-strong lightweight casing and controlled vacuum regulation from 0-22'' Hg. Voltage is 115/60. This model comes with a hospital grade plug.

Suction Pump, Aspirator,portable/3001

Model 300/3001 is a lightweight, diaphragm pump unit that is designed for general suction use. Its powerful 1/8 hp motor creates up to 22''Hg of vacuum. A diaphragm compressor with a flow rate of 30 lpm. Shipping weight is 23 lbs. Voltage is 115/60. The 300 unit is with a 600 ml bottle, and the 3001 is a 1100 ml Disposable Collection Unit.

Suction Pump, Constant

Model 6036/6037 This pump provides exceptional versatility through a unique constant/intermittent vacuum capability. This concept utilizes a diaphragm vacuum source with an automatic lock feature that maintains a separate collection system for the two mode selection (constant or intermittent). Constant range is 0-250 mm Hg, Intermittent range is 0-200 mm Hg, on 5.9 seconds, off 23 seconds. Shipping weight is 78 lbs. Voltage is 115/60. Model 6036 comes with (1) 2800 ml and (1) 600 ml glass bottles, Model 6037 comes with (1) 2100 ml DCU and (1) 1100 ml DCU.

Suction Pump, Constant & Intermittent/6037

Model 6036/6037 This pump provides exceptional versatility through a unique constant/intermittent vacuum capability. This concept utilizes a diaphragm vacuum source with an automatic lock feature that maintains a separate collection system for the two mode selection (constant or intermittent). Constant range is 0-250 mm Hg, Intermittent range is 0-200 mm Hg, on 5.9 seconds, off 23 seconds. Shipping weight is 78 lbs. Voltage is 115/60. Model 6036 comes with (1) 2800 ml and (1) 600 ml glass bottles, Model 6037 comes with (1) 2100 ml DCU and (1) 1100 ml DCU.

Suction Pump, Gastric, Stand Mtd/6000

Model 6000/6002 This thermotic pump is engineered to provide suction by alternating the expansion and contraction of air within a cylinder at regular intervals. This unit is designed for such specialized uses as gastric lavage, abdominal decompression, duodenal and fistula drainage and drainage following prostatectomy. Vacuum setting is 90 mm and 120 mm Hg, flow rate is .3lpm (high). Shipping weight is 58 lbs. Voltage is 115/60. Model 6000 has one 2800 ml glass bottle, Model 6002 comes with a 2100 ml Disposable Collection Unit.

Suction Pump, Gastric, Stand Mtd/6010

Model 6010/6011 This thermotic pump is engineered to provide suction by alternating the expansion and contraction of air within a cylinder at regular intervals. This unit is similar to the Model 6000 but it includes a flushing device to help keep clean and clear the drainage tube. Vacuum setting is 90mm and 120mm Hg, flow rate is .3 lpm (high). Shipping weight is 62 lbs. Voltage is 115/60. Model 6010 has one 2800 ml glass bottle, Model 6011 comes with a 2100 ml Disposable Collection Unit.

Suction Pump, Gastric, Stand Mtd/6011

Model 6010/6011 This thermotic pump is engineered to provide suction by alternating the expansion and contraction of air within a cylinder at regular intervals. This unit is similar to the Model 6000 but it includes a flushing device to help keep clean and clear the drainage tube. Vacuum setting is 90mm and 120mm Hg, flow rate is .3 lpm (high). Shipping weight is 62 lbs. Voltage is 115/60. Model 6010 has one 2800 ml glass bottle, Model 6011 comes with a 2100 ml Disposable Collection Unit.

Suction Pump, High Vacuum, Aspirator/s139

High Vacuum Aspirator (680mm)

Suction Pump, High Volume,surgical,stand Mtd/3810

Model 3810 This diaphragm style surgical pump is engineered for control of suction in surgical and delivery-room service. This unit includes a hospital approved three conductor cords. Vacuum range is 0-25'' Hg, 1/6 hp diaphragm compressor, belt driven. Shipping weight is 125 lbs. Voltage is 115/60. Unit includes one 2800 ml bottle.

Suction Pump, High Volume,surgical,stand Mtd/3840

Model 3840 This diaphragm surgical pump is engineered for control of suction in surgical and delivery-room service. This unit is designed for larger collection capacity, when required, with easy to operate lever control that brings second collection bottle into immediate use. This unit includes a hospital approved three conductor cord. Vacuum range is 0-25'' Hg, 1/6 hp diaphragm compressor, belt driven. Shipping weight is 130 lbs. Voltage is 130 lbs.

Suction Pump, Portable, Aspirator/4005 W/dcu

This model is designed for general suction use from emergency to recovery rooms outpatient or dental clinics. Unit has a 1/0 hp motor with a carbon rotary vane compressor, a flow rate of 30 lpm and will create up to 25'' Hg Vacuum. This unit has a 1100 ml Disposable Collection Unit. For Glass bottle unit see 01-12-0405. Voltage is 115/60.

Suction Pump, Portable,aspirator/405

This model is designed for general suction use from emergency to recovery rooms to outpatient or dental clinics. Unit has a 1/0 hp motor with a carbon rotary vane compressor, a flow rate of 30 lpm and will create up to 25'' Hg Vacuum. This unit has a glass 600 ml bottle. For Disposable unit see 01-12-4005. Voltage is 115/60.

Suction Pump, Uterine Aspirator, Stand Mtd/4072

This Uterine Aspirator is engineered to create up to 25'' Hg vacuum in 8 seconds. Flow rate is 30 lpm with 1/10 hp direct drive rotary vane compressor. Two 600 ml bottles and curettes are provided with this unit. Voltage is 115/60

Suction Regulator, Intermittent

The Intermittent Suction Regulator provides controlled intermittent suction gastrointestinal drainage from 0-160mm HG. Vacuum levels are indicated on a color coded glow in the dark 2'' gauge. Over-sized know bor easy adjustment and operation Weight bearing brass post prevents the case from cracking. Maintenance is easy and unit can be cleaned by flushing with cold sterilant.

Suction Regulator,continuous

Continuous Suction Regulator features new Soft-Touch knobs, can be sterilized internally with cold disinfectant, two year warranty, minimum maintenance, accurate precise control, impact-resistant internal components. The specifications of the Continuous Suction Regulator is as follows: Selector switches available at Regular and Off. Operating Range is 220 +/- 200 mm Hg. Flow Rate is 80 LPM (depending on equipment configuration, supply vacuum and air flow). Weight is 1.3 lbs. Vacuum Gauge Range is 0-300 mm Hg (increments of 5 mm Hg), 0 to 40 k Pa (increments of 2 k Pa), 2'' Diameter Gauge Face.

Suction Regulator,continuous/intermittent

The Continuous/Intermittent Vacuum Suction Regulator features new Soft-Touch knobs, can be sterilized internally with cold disinfectant, two year warranty, minimum maintenance, accurate precise control, impact-resistant internal components. The specifications of the Continuous/Intermittent Vacuum Suction Regulator is as follows: Selector switches available at Intermittent, Continuous and Off. Operating Range for Intermittent mode is 150mm Hg +/- 10, Continuous mode is 220mm Hg +/- 20. Flow rate for Intermittent is 10 LPM @ 50 mm Hg, for Continuous is 80 LPM (depending on equipment configuration, supply vacuum and air flow) Weight is 1.5 lbs. Vacuum Gauge Range is 0-3000 mm Hg (increments of 5 mm Hg), 0 to 40 kPa (Increments of 2 kPa), 2'' Diameter Gauge Face.

Suction Regulator,high Vacuum

High Vacuum Suction Regulator features new Soft-Touch knobs, can be sterilized internally with cold disinfectant, two year warranty, minimum maintenance, accurate precise control, impact-resistant internal components. The specifications of the High Vacuum Suction Regulator is as follows: Selector switches available at Regular, Full Line and Off. Operating Range is Maximum Available (Maximum vacuum levels are limited by the source vacuum available). Flow rate is 80 LPM for Regular, Full line is Maximum Available (Maximum depending on equipment configuration, supply vacuum and air flow) Weight is 1.3 lbs. Vacuum Gauge Range is 0-760 mm Hg (increments of 20 mm Hg), 0 to 100 kPa (5 kPa), 2'' Diameter Gauge Face.

Suction Regulator,surgical

Surgical Suction Regulator features new Soft-Touch knobs, can be sterilized internally with cold disinfectant, two year warranty, minimum maintenance, accurate precise control, impact-resistant internal components. The specifications of the Surgical Suction Regulator is as follows: Selector switches available at Regular, Full Line and Off. Operating Range is 0-300 mm Hg for Regular, Full line is Maximum Available (Maximum vacuum levels are limited by the source vacuum available. Flow rate is 80 LPM for Regular, Full line is Maximum Available (Maximum depending on equipment configuration, supply vacuum and air flow) Weight is 1.3 lbs. Vacuum Gauge Range is 0-300 mm Hg (increments of 5 mm Hg), 0 to 40 k Pa (increments of 2 k Pa), 2'' Diameter Gauge Face.

Surgex , Surge Suppressing Post Valve

In the past 10 years, more than 40 oxygen regulator fires have been reported in the US. The consequences have often been nothing short of catastrophic. SurgeX, the newest innovation from Allied, doesnt just compensate for potential fire-causing problems...it virtually eliminates them. By revolutionizing the standard 870-type post valve, and in conjunction with using a brass regulator, SurgeX is not only the key to complying with the newest oxygen-handling guidelines set by NIOSH, but it's also the safest portable oxygen system on the market today. The evidence is clear. Fires in portable oxygen systems do happen! Take steps to eliminate the potential for loss by ordering SurgeX post valves today. After all, fire prevention is less costly and infinitely less painful than facing the aftermath of a tragedy. Innovatively Engineered, Allied safe. SurgeX. Fire prevention starts right here. FEATURES Virtually eliminates the effects of adiabatic compression to a level well below the ignition point of materials in a regulator. Virtually eliminates particle impact due to its unique bayonet tube and bronze filter. Minimizes the risk of fire when hydrocarbons are present. When used with an all-brass regulator, SurgeX provides the absolute safest oxygen delivery system available today. For use with aluminum cylinders only. Rejuvenate your valuable assets by refurbishing your old aluminum cylinders. We completely retest and requalify each tank so they not only look new, but theyre also certified safe and ready to fill. And the next time you're having cylinders refurbished, insist on equipping them with SurgeX.

Surgical Mobile Aspirator

Gomco 3910 is a heavy duty, high performance mobile aspirators engineered for surgical suites. Both models generate up to -635 mm Hg of vacuum pressure and a 34 lpm flow rate at open flow. The Gomco 3910 comes with one reusable collection bottle, and the Gomco 3940 comes with two selectable collection bottles for extended use. Key Features * Maximum reliability thanks to the robust, maintenance-free and oil-free diaphragm pump design * Stable, heavy duty cart design with flat stainless steel sides and top * Mechanical shut-off float helps prevent fluid contamination * Convenient storage drawer for suction accessories Specifications Vacuum Range: -25 to -635 mm Hg Flow Rate: 34 lpm at open flow Sound Level: Less than 54 dBA Pump Type: Oil-less belt-driven diaphragm Electrical Cord: 6' hospital grade Dimensions: 20" W x 15" D x 32" H (50 x 38 x 80 cm) Weight: 110 lbs. (50 kg) UL/ETL Listed: No Warranty: 1 year Regulatory Approvals: FDA

Timeter Soft-touch Flowmeters Air

Timeter Soft-Touch Flowmeters
Air Flowmeter 0-15 lpm without adapter

Timeter Soft-touch Flowmeters Oxygen

Timeter Soft-Touch Flowmeters
Oxygen Flowmeter 0-15 lpm

Trauma Air Pants

Trauma Air Pants are designed to promote emergency care for the victim experiencing hypovolemic shock. They provide complete counter pressure aroung the legs and abdomen, coming safety and comfort for the patient. The Trauma Air Pants are especially suitable for pre-hospital and hospital use. L600 Includes Trauma Air Pants, Adult with 3 gauges, Pump Assembly, Case.

Ventilator, Autovent 3000

Life Support Products AutoVent Automatic Ventilator. AutoVent 3000 (Complete) Includes Control Module, Patient Valve, w/supply tubing 6' 02 Hose and Non Rebreathing Valve (to attach PEEP), (Peep Sold separately) with Connecting Tubing, 2 Second Version. For Adult or Pediatric Use.

Ventilator,autovent 2000

Life Support Products AutoVent Automatic Ventilator.
AutoVent 2000 (Complete) Includes Control Module, Patient Valve, w/supply tubing 6' 02 Hose and Non Rebreathing Valve (to attach PEEP), (Peep Sold separately) with Connecting Tubing, 2 Second Version. For Adult use only